| PART |
Description |
Maker |
| SSC2128 |
CMOS Low Dropout Voltage Regulat or
|
SeCoS Halbleitertechnologie GmbH
|
| AME8841REHA AME8841 AME8841AEHA AME8841BEHA AME884 |
Output voltage: 1.5V; 600mA CMOS LDO
Output voltage: 3.1V; 600mA CMOS LDO
Output voltage: 2.9V; 600mA CMOS LDO
Circular Connector; No. of Contacts:100; Series:MS27466; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:23; Circular Contact Gender:Socket; Circular Shell Style:Wall Mount Receptacle RoHS Compliant: No 600毫安的CMOS LDO稳压
Output voltage: 2.85V; 600mA CMOS LDO
Output voltage: 3.7V; 600mA CMOS LDO
|
AME[Analog Microelectronics]
AME, Inc.
|
| MIC37301-1.5BR MIC37301-1.5WR MIC37301-1.5YME MIC3 |
3.0A, Low-Voltage 渭Cap LDO Regulator
3.0A, Low-Voltage μCap LDO Regulator
1.8 V FIXED POSITIVE LDO REGULATOR, 0.55 V DROPOUT, PSSO5
|
Micrel Semiconductor
MICREL INC
|
| TK11100CS |
bipolar LDO regulator IC
|
TOKO
|
| AAT3237IGU-3.3-T1 MAX8556ETE/V MAX855609 |
300mA MicroPower LDO with PowerOK
4A Ultra-Low-Input-Voltage LDO Regulators
|
Advanced Analogic Technologies, Inc.
Maxim Integrated Products
|
| MIC49200-1.0WR MIC49200-1.8WR |
2A LOW VOLTAGE LDO WITH DUAL INPUT VOLTAGES 1.8 V FIXED POSITIVE LDO REGULATOR, 0.625 V DROPOUT, PSSO5
|
Micrel Semiconductor,Inc.
Micrel Semiconductor, Inc.
|
| AME1505 AME1505ACDVADJZ AME1505ACBV150 AME1505ACBV |
High Power BiPolar Linear LDO 高功率双极线性稳压器
|
AME, Inc.
AME[Analog Microelectronics]
|
| RE023 |
RE023 [Updated 2/03. 9 Pages] The RE023 is a Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.6V output voltage. rated for loads of up
Embedded ASIC Macrocell: Power Management for Mobile Terminals (PM), RE023 Fixed 2.6V 160 mA LDO Voltage Regulator
A Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.6V output voltage, rated for loads of up to 160 mA. A typical application is radio section supply in mobile terminals.
|
ATMEL[ATMEL Corporation]
|
| R1112N R1112N4.3BTR R1112N4.0BTR R1112N1.6ATL R111 |
Low noise 150mA LDO regulator. Output voltage 3.0V. Active high type. Standard taping type TR
Low noise 150mA LDO regulator. Output voltage 3.0V. Active high type. Taping type TL
Low noise 150mA LDO regulator. Output voltage 3.0V. Active low type. Standard taping type TR
Low noise 150mA LDO regulator. Output voltage 3.0V. Active low type. Taping type TL
LOW NOISE 150mA LDO REGULATOR 5 V FIXED POSITIVE LDO REGULATOR, 0.26 V DROPOUT, PDSO5
Analog IC 模拟IC
Test fixture for 0402 - 1812 body sizes
Linear Sensor Photodiode Array; 102x1 Sensor-Elements Organization; 300 Dots-Per-Inch (DPI) Sensor Pitch; On-Chip 8-bit Analog-to-Digital Conversion; Three-Zone Prgrammable Offset (Dark Level) and Gain; High Sped Serial Interface; 1MHz Pixel Rate
High reliability part. For price, availability and ordering contact Coilcraft Critical Products, cp@coilcraft.com
|
HIROSE ELECTRIC Co., Ltd.
Ricoh Co., Ltd.
RICOH electronics devic...
|
| LP2950CZ-3.3RA LP2950CZ-5.0RP LP2950ACZ-5.0RA LP29 |
100mA, 3.3V Output, Low Power Low Dropout Voltage Regulator; Package: TO-92 (TO-226) 5.33mm Body Height; No of Pins: 3; Container: Tape and Reel; Qty per Container: 2000 3.3 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PBCY3
100mA, 5.0V Output, Low Power Low Dropout Voltage Regulator; Package: TO-92 (TO-226) 5.33mm Body Height; No of Pins: 3; Container: Tape and Ammunition Box; Qty per Container: 1000 5 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PBCY3
100mA, 5.0V Output, Low Power Low Dropout Voltage Regulator; Package: TO-92 (TO-226) 5.33mm Body Height; No of Pins: 3; Container: Tape and Reel; Qty per Container: 2000 5 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PBCY3
100mA, 5.0V Output, Low Power Low Dropout Voltage Regulator- Pb Free Device; Package: DPAK 4 LEAD Single Gauge Surface Mount; No of Pins: 4; Container: Tape and Reel; Qty per Container: 2500 5 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PSSO3
100 mA, Low Power Low Dropout Voltage Regulator 3.3 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PSSO3
100 mA, Low Power Low Dropout Voltage Regulator 3 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PSSO3
CONNECTOR ACCESSORY 3 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PSSO3
100 mA, Low Power Low Dropout Voltage Regulator 5 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PSSO3
Micropower Voltage Regulators 3 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PSSO3
128 x 128 pixel format, LED or EL Backlight available 3.3 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PBCY3
Micropower Voltage Regulators 3.3 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PBCY3
Micropower Voltage Regulators 5 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PSSO3
Micropower Voltage Regulators 5 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PBCY3
Micropower Voltage Regulators 3 V FIXED POSITIVE LDO REGULATOR, 0.45 V DROPOUT, PBCY3
100mA, 3V Output, Low Power Low Dropout Voltage Regulator with Error Flag output; ; Pb Free Device; Package: Micro8™; No of Pins: 8; Container: Tape and Reel; Qty per Container: 4000
|
ON Semiconductor
|
| MIC37302 MIC37302BR MIC37302BU MIC37300-3.3BR MIC3 |
3.0A, Low-Voltage µCap LDO Regulator -
3.0A/ LOW VOLTAGE UCAP LDO REGULATOR
3.0A LOW VOLTAGE UCAP LDO REGULATOR
3.0A, LOW VOLTAGE UCAP LDO REGULATOR
|
MICREL[Micrel Semiconductor]
|
| 30KW258A 30KW168 30KW168A 30KW216 30KW240 30KW240A |
258.00V; 5mA ;15000W peak pulse power; glass passivated junction transient voltage suppressor. For bipolar applications
168.00V; 5mA ;15000W peak pulse power; glass passivated junction transient voltage suppressor. For bipolar applications
216.00V; 5mA ;15000W peak pulse power; glass passivated junction transient voltage suppressor. For bipolar applications
240.00V; 5mA ;15000W peak pulse power; glass passivated junction transient voltage suppressor. For bipolar applications
120.00V; 5mA ;15000W peak pulse power; glass passivated junction transient voltage suppressor. For bipolar applications
198.00V; 5mA ;15000W peak pulse power; glass passivated junction transient voltage suppressor. For bipolar applications
270.00V; 5mA ;15000W peak pulse power; glass passivated junction transient voltage suppressor. For bipolar applications
156.00V; 5mA ;15000W peak pulse power; glass passivated junction transient voltage suppressor. For bipolar applications
132.00V; 5mA ;15000W peak pulse power; glass passivated junction transient voltage suppressor. For bipolar applications
144.00V; 5mA ;15000W peak pulse power; glass passivated junction transient voltage suppressor. For bipolar applications
288.00V; 5mA ;15000W peak pulse power; glass passivated junction transient voltage suppressor. For bipolar applications
102.00V; 5mA ;15000W peak pulse power; glass passivated junction transient voltage suppressor. For bipolar applications
|
MDE Semiconductor
|
